Спецификации установки автомобильных датчиков
Спецификации момента затяжки, зазора и прокладки жгутов для датчиков O2, коленвала и скорости с шагами калибровки.
Torque
Tighten to the torque specified in the service manual — over-tightening damages threads, under-tightening causes signal drift.
Clearance & Routing
Wheel-speed air gap must be set with original shims; keep harness away from heat and moving parts, secured every 20cm.
Calibration
After fitment, run zero-learning and clear DTCs with a scanner, then road-test for intermittent dropouts.